Flipr device

How do I know if I have a Flipr 1, Flipr 2, Flipr Start, or Flipr Pro?
Flipr 1 was sold from 01/06/2016 to 31/03/2018.  Flipr 2 was sold from 01/04/2018 to 17/04/2019. Considering some of our distributors stocks, it is likely ...
Thu, 27 Jun, 2019 at 2:21 PM
How and where to place Flipr?
Flipr will free float around your pool following the water flow. If it bothers you, you can place it in the following locations: Skimmer :  As long as...
Thu, 27 Jun, 2019 at 3:02 PM
Can I use Flipr in a hot tub ?
2019 Models (Flipr Start and Flipr Pro) These models are compatible for both pools and spas. We formally advise against the use of one device for both :...
Thu, 27 Jun, 2019 at 4:11 PM
How to mount Flipr 2, Flipr Start and Flipr Pro with the Fix'n'Swim accessory?
You wish to use your Fix'n'Swim with Flipr 2: Make sure you have the right adapter and screw (if not: contact customer service to receive one...
Thu, 27 Jun, 2019 at 4:33 PM
How to perform a new calibration ?
At the beginning of the season, it is recommended to recalibrate the probes: this ensures reliable and accurate measurements throughout the summer. To p...
Thu, 27 Jun, 2019 at 4:43 PM
Flipr is cracked / damaged
In case of a crack or significant impact affecting the measurement or the correct operation of Flipr, please follow the recommendations below: Remove F...
Thu, 27 Jun, 2019 at 4:47 PM
Some items are missing in the box!
You have received a Flipr 2, Flipr Start, or Flipr Pro (available from 01/04/2018) Here is the list of items you will find in the box of your Flipr: ...
Thu, 27 Jun, 2019 at 5:29 PM
My test strips are ineffective
Your strips are unusable (fallen, wet, defective, etc.). You can order them within the calibration kit directly on our website.
Sun, 30 Jun, 2019 at 2:47 PM
What is the purpose of the orange Anylock stick ? (Flipr 1)
The Anylock orange bar was supplied with Flipr 1 only. This bar allows you to close the storage bag (also only supplied with Flipr 1) during the winteri...
Sun, 30 Jun, 2019 at 2:51 PM
My wintering liquids are empty !
Flipr probes must be in constant contact with water. This is why a preservative liquid (KCL) is present in the storage cap. If you need to remove Flipr ...
Sun, 30 Jun, 2019 at 3:15 PM