2019 Models (Flipr Start and Flipr Pro)

These models are compatible for both pools and spas. We formally advise against the use of one device for both :

  • You will need to make a change in the application settings each time you change the pond (size of the pool, type of treatment, etc.). Indeed, the application only manages the registration of one pool per customer account.
  • You will receive alerts and dosing advice that is not very precise or adapted: The application will have difficulty defining which product will be more effective in the pool or hot tub in the event of frequent changes. For example application might recommend hot tub products for your pool, and vice versa.
  • Re-calibration / calibration of the probes are required several times a year: Changing water, and sometimes treatment, can cause premature disruption of the probes and may therefore require new calibrations during the season.
  • Mixing data in Flipr PREDICT: Flipr will mix pool and hot tub data in the history, which can cause problems in the graphs, but also in the predictive tips displayed by the application.


2017/18 models (Flipr 1, Flipr 2, Flipr Spa 1, Flipr Spa 2).

Flipr Pool and Flipr SPA are based on the same technology. Nevertheless, Flipr Spa has its own elements and functionalities to adapt to whirlpools, in particular:

  • A reinforced casing to better resist shocks caused by shakier water conditions.
  • Alerting functionalities and settings dedicated to Spas, in order to better take into account the specificity of water quality in these ponds.


Using the same Flipr for your pool and spa can have the following disadvantages:

  • You will need to make a change in the application settings each time you change the pond (size of the pool, type of treatment, etc.). Indeed, the application only manages the registration of one pool per customer account.
  • You will receive alerts and dosing advice that is not very precise or adapted: The application will have difficulty defining which product will be more effective in the pool or hot tub in the event of frequent changes. For example application might recommend hot tub products for your pool, and vice versa.
  • Re-calibration / calibration of the probes are required several times a year: Changing water, and sometimes treatment, can cause premature disruption of the probes and may therefore require new calibrations during the season.
  • Mixing data in Flipr PREDICT: Flipr will mix pool and hot tub data in the history, which can cause problems in the graphs, but also in the predictive tips displayed by the application.