You have received a Flipr 2, Flipr Start, or Flipr Pro (available from 01/04/2018)


Here is the list of items you will find in the box of your Flipr:


  • Your Flipr
  • The storage end cap, already screwed on the lower part of the Flipr: this plug will allow you to calibrate your Flipr and keep the probes watered during winter ( when passive wintering).
  • the usage end cap, this item needs to be screwed on the lower device's lower part after calibration AND BEFORE using Flipr in your pool or hot tub.
  • Blue calibration liquid (pH7)
  • Red calibration liquid (pH4)
  • A test strip + its own user guide


You have received a Flipr 1 (available from 01/06/2016 to 31/03/2018)


Here is the list of items you will find in the box of your Flipr:


  • Your Flipr, packed in a bag containing storage liquid + aditional bag.
  • Blue calibration liquid (pH7)
  • Red calibration liquid (pH4)
  • A test strip + its own user guide
  • The user manual
  • The Anylock sealing stick : This item will allow you to close the storage bag and seal it during the wintering phase.

The two empty spaces are used to pour the storage liquids and to calibrate Flipr. (see photo below). This operation should only be done when the application asks you to do so.


If however an item is missing in your box, contact us immediately.